This budget acrylic sheet in the colour white has a thickness of 3 mm. This makes this material suitable for making display cases or door canopies. You can also use it for windbreaks. Pay attention: this acrylic is difficult to process because it is an extruded acrylic sheet (XT). Do you want to be able to process the acrylic sheet without any worries? Then we recommend that you view our moulded acrylic sheets.
This budget acrylic sheet is 28% translucent and UV resistant. This allows you to use this acrylic for both outdoor and indoor applications. The sheet has a thickness tolerance of 10 percent; this means that the thickness of the plate can actually differ from the thickness stated on this page.
Specific mass | gr/cm3 | 1,18 |
Mechanical properties (at 20°C) | ||
Flexural strength | N/mm | 117,7 |
Stretch to breakage | % | 5.5 |
High pressure strength | N/mm2 | 117,7 |
E. Modules | N/mm2 | 3188 |
Indentation strength | J/m2 | 29,4 |
Impact resistance | KJ/m2 | 19,6 |
Tensile strength | N/mm2 | 73,7 |
Friction coefficient | 0,54 | |
Water absorption at 20°C RV 65% | % | 0,26 |
Water absorption at 20°C RV 100% | % | 0,30 |
Thermal properties | ||
processing temperature (Vivat) | °C | 110 |
Melting temperature | °C | 168 |
Linear expansion coefficient | °C | 80.10-6 |
Thermal conduction | W/(k.m) | 0,19 |
Specific heat | KJ/(kg.K) | 1,47 |
Maximum permissible temperature, without load | °C | 70 |
Minimum permissible temperature, without load | °C | -40 |
Electrical properties | ||
Dielectric contstant | 3,5 | |
Dielectric loss factor | tg | 0,02-0,06 |
Breakdown voltage | kV/mm | 30 |
Surface resistance | Ω | not measurable |
Specific resistance | Ω.cm | >10 13 |
Budget acrylic sheet – opal is made from extruded acrylic(XT). Processing is limited with this type of sheet. You can process the sheet by carefully drilling, hot bending, milling, engraving, glueing, polishing and sawing. But pay attention that the material does not tear. Do you want to be able to process the acrylic without any worries? Then we recommend that you opt for a moulded acrylic sheet. With these sheets, the risk of cracks is minimal.
The White opal extruded (XT) acrylic sheet 3 mm is very suitable for advertising and design applications, such as light boxes. In addition, opal acrylic is widely used in interior and stand construction.
We ensure that your order is ready for dispatch within 24 hours. You can track your order from door to door via the Track & Trace code.
To prevent damage to larger sheets, we use special, custom-made frames to transport them. The shipping costs depend on the size and weight of the package. View the shipping cost table.