Acrylic sheet is widely used as a replacement for glass. These transparent coloured sheets are not only thirty times stronger than glass, but also half the weight. This type of acrylic is called “cast acrylic”. This material was cast into large sheets during production, making the sheet stress-free. This makes this clear acrylic suitable for extensive processing such as sawing, drilling, milling and (hot) bending.
The acrylic sheets are UV-resistant, making them highly suitable for indoor and outdoor applications. The sheet has a thickness tolerance of 10 percent; this means that the thickness of the plate can actually differ from the thickness stated on this page. The sheets are supplied with a protective film on both sides and are sawn to the required size for free.
| Specific mass | gr/cm3 | 1,18 |
| Mechanical properties (at 20°C) | ||
| Flexural strength | N/mm | 117,72 |
| Stretch to breakage | % | 3,5 |
| High pressure strength | N/mm2 | 117,7 |
| E. Modules | N/mm2 | 3188 |
| Indentation strength | J/m2 | 39,24 |
| Impact resistance | KJ/m2 | 24,53 |
| Tensile strength | N/mm2 | 73,7 |
| Friction coefficient | 0,54 | |
| Water absorption at 20°C RV 65% | % | 0,25 |
| Water absorption at 20°C RV 100% | % | 0,36 |
| Thermal properties | ||
| processing temperature (Vivat) | °C | 105 |
| Melting temperature | °C | 180 |
| Linear expansion coefficient | °C | 70.10-6 |
| Thermal conduction | W/(k.m) | 0,186 |
| Specific heat | KJ/(kg.K) | 1,47 |
| Maximum permissible temperature, without load | °C | 70 |
| Minimum permissible temperature, without load | °C | -20 |
| Electrical properties | ||
| Dielectric contstant | 2,9 | |
| Dielectric loss factor | tg | 0,017 |
| Breakdown voltage | kV/mm | 17 |
| Surface resistance | Ω | 10 14 |
| Specific resistance | Ω.cm | >10 13 |
This clear acrylic sheet 5mm is made of cast acrylic (GS). This acrylic is very suitable for operations such as sawing, drilling, milling and (hot) bending.
Thanks to the good UV-resistant qualities of this clear acrylic sheet, it can be used for both indoor and outdoor applications. Think for example of display cases, secondary glazing and nameplates.
Are you wondering whether the Clear cast (GS) acrylic sheet 5 mm is suitable for your project? Then order a sample. Then you can take your time to consider it, without having to order a whole sheet.
We ensure that your order is ready for dispatch within 24 hours. You can track your order from door to door via the Track & Trace code.
To prevent damage to larger sheets, we use special, custom-made frames to transport them. The shipping costs depend on the size and weight of the package. View the shipping cost table.
