HPL texture sheet 6 mm signal yellow RAL 1003

Description

This HPL sheet is 6 mm thick and is signal yellow with RAL 1003. The surface of the sheet is lightly textured with a silky glow. Both sides of the sheet are coloured. HPL sheets are a dense, hard material with a fixed form. They are well suited for both indoor and outdoor application. This private label HPL sheet will be cut to size for you, free of charge.

Sustainable
The life span of HPL is 30 years and the sheet won’t decay because moisture, sunlight, mould and wood rot cannot penetrate the dense surface of the material. This impenetrable top layer is formed during the production of HPL. In production, several layers of wood fibre and paper are soaked in phenolic resin and then compressed under high temperature. This results in a rock-hard sheet with a UV resistant top layer.

Low-maintenance
HPL sheets are extremely low-maintenance. Cleaning an HPL sheet is simple because the material is impenetrable for dirt. Cleaning the sheets regularly with warm water and a mild cleaning product is all that is required. We recommend using a soft cloth or brush instead of an abrasive sponge, since this can leave the surface scratched and with a matt appearance.

Easy to process
HPL has an extremely hard top layer, but with the right DIY tools HPL sheets are easy to work with. We recommend using tools that are also suitable for working on hard wood surfaces. In our blog sections you can find several tips and tricks to get the job done. Here you will find articles on sawing, gluing, drilling and painting HPL sheets.

Characteristics
HPL sheets have a few important characteristics. The following aspects are good to know about our private label HPL sheets:

• Colour: signal yellow RAL 1003 (this is a colour indication; our sheets are not bound to RAL colours)
• Maximum sheet size: 305 x 130 cm
• Thickness top layer: 0.8 mm
• Double sided: both sides can be used as visible side
• UV and heat resistance: High
• Life span: 30 years
• When sawing the sheets to size the edges can get slightly damaged, unfortunately this cannot be prevented. The possible damaged area will never be wider than 0.5 mm.
• Thickness tolerance of 10%

Workability
HPL is an extremely tough plastic and can only be altered by using the right equipment. With the right tools the following alterations can be accomplished:

• Sawing
• Milling
• Drilling
• Painting

Applications
HPL is a versatile plastic that can be used for many different purposes. Indoors, HPL is regularly used in areas where hygiene plays an important role. Outdoors, HPL is used for many applications, including billboards and fascia boards.

• Fascia boards
• Exterior cladding
• Billboards
• Hygienic areas (laboratory/operating rooms)
• Desks

Specifications

Property	Test method	Property or attribute	Unit	Values
Thickness	EN 438-2.5	Thickness	mm	2,0 ≤ t <   3,0   ± 0,20
				3,0 ≤ t <   5,0   ± 0,30
				5,0 ≤ t <   8,0   ± 0,40
				8,0 ≤ t < 12,0   ± 0,50
				12,0 ≤ t < 16,0   ± 0,60
				16,0 ≤ t < 20,0   ± 0,70
				20,0 ≤ t < 25,0   ± 0,80
				25,0 ≤ t < nader overeen te komen
Flatness	EN 438-2.9	Maximum deviation	mm/m	1 side decor:
				2,0 ≤ t < 5,0   ± 0,50
				2 side decor:
				2,0 ≤ t <   6,0   ≤ 8,0
				6,0 ≤ t < 10,0   ≤ 5,0
				10,0 ≤ t              ≤ 3,0
Length and width	EN 438-2.6	Length and width	mm	+ 10 / 0
Straighness of edges	EN 438-2.7	Maximum deviation	mm/m	1,5
Squareness	EN 438-2.8	Maximum deviation	mm/m	1,5
Resistance to surface wear	EN 438-2.10	Wear resistance	Revs	IP ≥ 150
Resistance to immersion in boiling water	EN 438-2.12	Mass increase	%	CGS: 2 ≤ t < 5 ≤ 5        CGF: ≤ 7
				CGS: 5 ≤ t       ≤ 2        CGF: ≤ 3
		Thickness increase	%	CGS: 2 ≤ t < 5 ≤ 6        CGF: ≤ 9
				CGS: 5 ≤ t       ≤ 2        CGF: ≤ 6
		Surface appearance gloss finish	Rating	≥ 3
		Surface appearance other finishes		≥ 4
		Edge		≥ 3
Resistance to dry heat (160 °C)	EN 438-2.16	Surface appearance gloss finish	Rating	≥ 3
		Surface appearance other finishes	Rating	≥ 4
Resistance to wet heat (100 °C)	EN 438-2.18	Surface appearance gloss finish	Rating	≥ 3
		Surface appearance other finishes	Rating	≥ 4
Stability at elevated temperatures	EN 438-2.17	Cumulative dimensional change	%	2 ≤ t < 5   ≤ 0,40   ≤ 0,80
			%	2 ≤ t   ≤ 0,30   ≤ 0,60
Resistance to impact by large diameter fall	EN 438-2.21	Drop height	mm	2 ≤ t  < 6   ≥ 1.400
				2 ≤ t          ≥ 1.800
		Indentation diameter	mm	10 mm
Resistance to crazing (thick laminates)	EN 438-2.24	Appearance	Rating	≥ 4
Resistance to scratching	EN 438-2.25	Surface appearance smooth finishes	Rating	≥ 2
		Surface appearance textured finishes	Rating	≥ 3
Resistance to staining	EN 438-2.26	Appearance groups 1-2	Rating	5
		Appearance group 3	Rating	≥ 4
Lightfastness	EN 438-2.27	Contrast	Grey scale rating	≥ 4
Resistance to water vapour	EN 438-2.14	Surface appearance gloss finish	Rating	≥ 3
		Surface appearance other finishes	Rating	≥ 4
Electrical resistance	EN 61340-4-1	RV (23° C / 50% RH)	Ohm	1×109 – 1×1011
Thermal conductivity	EN 12664: 2001	–	W/m . °K	0,25
Coefficient of linear thermal expansion	ASTM D 696	–	°C -1	L = 1,6 x 10-5 ca.
				L = 3,5 x 10-5 ca.
Flexural strength	EN ISO 178	Stress		≥ 80
Flexural modulus	EN ISO 178	Stress		≥ 9.000
Density	ISO 1183	Density		≥ 1,35

 

Test method	Norm	Classification CGF	Classification CGS
Small flame and radiation px	UNI 8457, UNI 9174, UNI 9177	Class 1	Class 1
Spread of flame	BS 476-7	Class 1	Class 2
Fire rating	DIN 4102-1	B1	B2
Epiradiatore	NF P 92-501	M1	/
Fire behaviour of materials and components	EN 45545-2: 2013	2 ≤ t < 25 mm    HL1 – HL2 – HL3	5 ≤ t ≤ 25 mm    HL1 – HL2
Reaction to fire	EN 13501-1	2 ≤ t < 6 mm    B-s2,d0    t ≥ 6 mm B-s1,d0	t ≥ 4 mm D-s2,d0    t ≥ 6 mm C-s2,d0    t ≥ 12 mm B-s1,d0