This HPL panel is 6mm thick and fir green RAL 6009 in colour. The structured top layer is coloured on one side and has a satin finish. In addition, the panel is UV-resistant, vandal-proof, weather-resistant and easy to clean. These properties make this material ideal for outdoor applications such as wall cladding.
Whichever Trespa® panel you choose, we have it in stock. Have it cut to size for free and combine your order with matching screws.
Trespa® sheets have a very compact core and rock-hard synthetic top layers. This makes the panels rigid and very hard. In short, an idiot-proof and vandal-resistant sheet material. The top layers are UV-resistant and retain their appearance for more than 30 years.
Please note that Trespa® sheets are coloured on one side and have a thickness tolerance of 10%. This means that the thickness of the panel can actually deviate by about 10%.
| Property | Test method | Property or attribute | Unit | Values |
| Thickness | EN 438-2.5 | Thickness | mm | 2,0 ≤ t < 3,0 ± 0,20 |
| 3,0 ≤ t < 5,0 ± 0,30 | ||||
| 5,0 ≤ t < 8,0 ± 0,40 | ||||
| 8,0 ≤ t < 12,0 ± 0,50 | ||||
| 12,0 ≤ t < 16,0 ± 0,60 | ||||
| 16,0 ≤ t < 20,0 ± 0,70 | ||||
| 20,0 ≤ t < 25,0 ± 0,80 | ||||
| 25,0 ≤ t < nader overeen te komen | ||||
| Flatness | EN 438-2.9 | Maximum deviation | mm/m | 1 side decor: |
| 2,0 ≤ t < 5,0 ± 0,50 | ||||
| 2 side decor: | ||||
| 2,0 ≤ t < 6,0 ≤ 8,0 | ||||
| 6,0 ≤ t < 10,0 ≤ 5,0 | ||||
| 10,0 ≤ t ≤ 3,0 | ||||
| Length and width | EN 438-2.6 | Length and width | mm | + 10 / 0 |
| Straighness of edges | EN 438-2.7 | Maximum deviation | mm/m | 1,5 |
| Squareness | EN 438-2.8 | Maximum deviation | mm/m | 1,5 |
| Resistance to surface wear | EN 438-2.10 | Wear resistance | Revs | IP ≥ 150 |
| Resistance to immersion in boiling water | EN 438-2.12 | Mass increase | % | CGS: 2 ≤ t < 5 ≤ 5 CGF: ≤ 7 |
| CGS: 5 ≤ t ≤ 2 CGF: ≤ 3 | ||||
| Thickness increase | % | CGS: 2 ≤ t < 5 ≤ 6 CGF: ≤ 9 | ||
| CGS: 5 ≤ t ≤ 2 CGF: ≤ 6 | ||||
| Surface appearance gloss finish | Rating | ≥ 3 | ||
| Surface appearance other finishes | ≥ 4 | |||
| Edge | ≥ 3 | |||
| Resistance to dry heat (160 °C) | EN 438-2.16 | Surface appearance gloss finish | Rating | ≥ 3 |
| Surface appearance other finishes | Rating | ≥ 4 | ||
| Resistance to wet heat (100 °C) | EN 438-2.18 | Surface appearance gloss finish | Rating | ≥ 3 |
| Surface appearance other finishes | Rating | ≥ 4 | ||
| Stability at elevated temperatures | EN 438-2.17 | Cumulative dimensional change | % | 2 ≤ t < 5 ≤ 0,40 ≤ 0,80 |
| % | 2 ≤ t ≤ 0,30 ≤ 0,60 | |||
| Resistance to impact by large diameter fall | EN 438-2.21 | Drop height | mm | 2 ≤ t < 6 ≥ 1.400 |
| 2 ≤ t ≥ 1.800 | ||||
| Indentation diameter | mm | 10 mm | ||
| Resistance to crazing (thick laminates) | EN 438-2.24 | Appearance | Rating | ≥ 4 |
| Resistance to scratching | EN 438-2.25 | Surface appearance smooth finishes | Rating | ≥ 2 |
| Surface appearance textured finishes | Rating | ≥ 3 | ||
| Resistance to staining | EN 438-2.26 | Appearance groups 1-2 | Rating | 5 |
| Appearance group 3 | Rating | ≥ 4 | ||
| Lightfastness | EN 438-2.27 | Contrast | Grey scale rating | ≥ 4 |
| Resistance to water vapour | EN 438-2.14 | Surface appearance gloss finish | Rating | ≥ 3 |
| Surface appearance other finishes | Rating | ≥ 4 | ||
| Electrical resistance | EN 61340-4-1 | RV (23° C / 50% RH) | Ohm | 1×109 – 1×1011 |
| Thermal conductivity | EN 12664: 2001 | – | W/m . °K | 0,25 |
| Coefficient of linear thermal expansion | ASTM D 696 | – | °C -1 | L = 1,6 x 10-5 ca. |
| L = 3,5 x 10-5 ca. | ||||
| Flexural strength | EN ISO 178 | Stress | ≥ 80 | |
| Flexural modulus | EN ISO 178 | Stress | ≥ 9.000 | |
| Density | ISO 1183 | Density | ≥ 1,35 |
| Test method | Norm | Classification CGF | Classification CGS |
| Small flame and radiation px | UNI 8457, UNI 9174, UNI 9177 | Class 1 | Class 1 |
| Spread of flame | BS 476-7 | Class 1 | Class 2 |
| Fire rating | DIN 4102-1 | B1 | B2 |
| Epiradiatore | NF P 92-501 | M1 | / |
| Fire behaviour of materials and components | EN 45545-2: 2013 | 2 ≤ t < 25 mm HL1 – HL2 – HL3 | 5 ≤ t ≤ 25 mm HL1 – HL2 |
| Reaction to fire | EN 13501-1 | 2 ≤ t < 6 mm B-s2,d0 t ≥ 6 mm B-s1,d0 | t ≥ 4 mm D-s2,d0 t ≥ 6 mm C-s2,d0 t ≥ 12 mm B-s1,d0 |
With the right cutting tools, you can saw, mill and drill the Trespa® Meteon® panels. These panels can also be screwed or glued. For glueing, we recommend the quality products from the Bostik brand.
Trespa® Meteon® is the product line for wall cladding and outdoor applications.
The material is completely weather-resistant and impervious to moisture. You often encounter Trespa® plates in Bilboards and Exterior cladding.
We ensure that your order is ready for dispatch within 24 hours. You can track your order from door to door via the Track & Trace code.
To prevent damage to larger sheets, we use special, custom-made frames to transport them. The shipping costs depend on the size and weight of the package. View the shipping cost table.
