Blind spacers - Round white - Set of 10

With this set of round spacers you can mount milled letters and logos to the wall completely out of sight. The two-part click system lets your letters float away from the wall, without a single screw on show.

• Complete: 10 male parts, 10 female parts, 10 stainless steel screws, 10 plugs and a torx bit
• Round shape: compact and discreet, ideal for smooth, flat surfaces
• Suitable for indoor and outdoor use
• White, disappearing behind light letters and on light surfaces
• All you need is a cordless drill

You glue the male part to the back of your letter and screw the female part into the wall. Click and done. Use the set for your company name on the façade, a logo behind the counter or an advertising board on an exterior wall.

The spacers are made of nylon and come with stainless steel screws. The round shape is the compact standard: it takes up little room behind your letter, so you can fit it into narrow letter sections too, such as the stem of an 'I' or the thin stroke of an 'S'.

Choose the white version when your letters are light in colour or go on a light façade or wall. If you can see the fixing through a transparent or light letter, white stands out far less than black. This combination — round and white — is therefore the most discreet in the range, and the logical choice for smart indoor work in acrylic.

These spacers are ready to use, so you don't need to process them.

What does matter: tighten the screw in the female part hand-tight and then back it off a quarter of a turn. You need that small bit of play to click the male part smoothly into the female part and to absorb minor alignment differences between your mounting points. If you tighten everything wall-tight, you won't be able to fit the letter on without tension.

With the round version, hold the female part steady while you do the final turn. A round holder can turn along with the screw, and then it's no longer on the point you marked.

Anywhere you want to mount letters, logos or boards without a visible fixing. The round shape is the logical choice for smart, modern lettering on a flat surface, and its compact size means it fits into narrow letter sections too. In white it disappears completely behind light lettering.

Main areas of use

• Interior — logos behind the reception, wall signs in showrooms, name plates on office doors and wayfinding on light walls
• Transparent lettering — letters in clear acrylic, where you look through the material at the fixing
• Façade lettering — company names, shop name boards and house numbers in large format on a light, flat façade
• Retail and events — exhibition stands, promotional boards and brand displays, quick to put together and click apart again

Remove dust and dirt with an antistatic polishing cloth and, if needed, a little lukewarm water with a mild cleaning agent. Never use a pressure washer on mounted letters: it can force the glue joint or the click apart.

For outdoor mounting we recommend a quick check once a year. Is every letter still holding firmly, are there any cracks at the glue points, is dirt or moisture building up behind the letters? You can simply unclick a letter, take a look and put it back. You'll find more cleaning products among our accessories.

For a mount that lasts for years, work in three steps: clean, glue, finish.

Cleaning — Fixxerss IPA Bonding Cleaner removes grease, dust and other dirt from your surfaces and dries residue-free. Use it on both the back of your letters and on the male parts. This isn't an optional step; it's the difference between a glue joint that holds and one that lets go after a winter.

Gluing — For acrylic and polycarbonate, reach for the Fixxerss Super Glue. Fixxerss Foamtape works well for light indoor letters on a smooth surface or for temporary displays, and it's also handy for fixing a letter in place while you mark out the drill holes.

Finishing — the antistatic polishing cloth keeps your letters dust-free without scratches. The antistatic action stops dust from clinging, which is a particular issue with plastic letters that build up static. Also perfect for applying the IPA Bonding Cleaner.