Blind spacers - Round black - Set of 10

With this set of round spacers you can mount milled letters and logos to the wall completely out of sight. The two-part click system lets your letters float off the wall, without a single screw coming into view.

• Complete: 10 male parts, 10 female parts, 10 stainless steel screws, 10 wall plugs and a torx bit
• Round shape: compact and discreet, ideal for smooth, flat surfaces
• Suitable for indoor and outdoor use
• Black, stays hidden behind your lettering
• All you need is a cordless drill

You glue the male part to the back of your letter and screw the female part into the wall. Click and done. Use the set for your company name on the façade, a logo behind the reception desk or an advertising board on an outside wall.

The spacers are made of acrylic and PVC and come with stainless steel screws. The round shape is the compact standard: it takes up little room behind your letter, so you can fit it into narrow letter sections such as the stem of an 'I' or the thin stroke of an 'S'.

Choose round when your surface is smooth and flat: plaster in good condition, plasterboard, wood, concrete or a tidy brick façade. If you're working on rough, weathered or crumbling brickwork, the oval version gives you more grip.

These spacers are ready to use, you don't need to process them.

What does matter: tighten the screw into the female part by hand and then turn it back a quarter turn. You need that small bit of play to click the male part smoothly into the female part and to absorb any minor alignment differences between your mounting points. If you tighten everything solid against the wall, you won't be able to fit the letter on without tension.

With the round version, hold the female part still while you turn the last bit. A round spacer can spin round with the screw, and then it no longer sits on the point you marked out.

Anywhere you want to mount letters, logos or boards without visible fixings. The round shape is the obvious choice for sleek, modern lettering on a flat surface, and its compact size means it also fits into narrow letter sections.

Main areas of application

• Interiors — logos behind the reception, wall signs in showrooms, name plates on office doors and wayfinding
• Façade lettering — company names, shop name boards, large-format house numbers and advertising boards with a floating 3D effect on a tidy, flat façade
• Retail and events — exhibition stands, promotional boards and brand displays, quick to mount and click off again
• Public buildings — department signs, wayfinding in hospitals and schools, project boards on building sites

Remove dust and dirt with an antistatic cloth and, if needed, a little lukewarm water with a mild cleaning agent. Never use a pressure washer on mounted letters: it can force the glue joint or the click apart.

For outdoor mounting we advise a quick check once a year. Is every letter still firmly fixed, are there any cracks near the glue points, is dirt or moisture building up behind the letters? Clicking a letter off, having a look and putting it back is perfectly fine. You'll find more cleaning products among our accessories.

For a mounting job that lasts years, work in three steps: clean, glue, finish.

Cleaning — Fixxerss IPA Bonding Cleaner removes grease, dust and other dirt from your surfaces and dries residue-free. Use it on both the back of your letters and on the male parts. This isn't an optional step; it's the difference between a glue joint that holds and one that fails after a winter.

Gluing — For acrylic and polycarbonate, reach for the Fixxerss Super Glue.

Finishing — the antistatic cloth keeps your letters dust-free without scratching. The antistatic effect stops dust sticking, which is especially an issue with plastic letters that build up static. Also perfect for applying the IPA Bonding Cleaner.