With this window seal for a portable air conditioner, you can direct warm air outside through the exhaust hose while keeping new warm air from entering. The panel is made from 4 mm thick black acrylic, which completely blocks light and visibility. Ideal if you want to keep your window open at night without even a ray of light shining outside or anyone being able to see in.
You can order the window seal fully customised to fit your window in any size you need.
The standard exhaust hose opening is 15.5 cm in diameter. Measure the outside diameter of your exhaust hose and add 0.5 cm to determine the correct opening size. The opening is positioned 20 cm from the bottom edge as standard (Y position).
For installation, you can choose between two fixing methods: glazing clips or hook-and-loop tape.
You can choose between two mounting methods to install the 4 mm plexiglass window seal for the mobile air conditioner: with glazing clips or with Velcro. On this page you will find out which mounting method applies to your window, and all the necessary supplies for each method.
For mounting with glazing clips, you will of course need glazing clips, but the amount of glazing clips depends on the size of your window. See how many glazing clips you need for your window seal here. In addition to glazing clips, you will also need insulation tape.
| Side in cm | Clips per side |
|---|---|
| 20 - 49 cm | 2 |
| 50 - 89 cm | 3 |
| 90 - 129 cm | 4 |
| 130 - 169 cm | 5 |
| 170 - 200 cm | 6 |
When you order the Velcro tape set, you will receive two different tapes, the rough ‘hook’ side of the tape and a soft ‘loop’ side of the tape’. To mount the window seal, stick the soft tape side on or in the frame. Then place the rough ‘hook’ side on the edges of the plexiglass. First cut the tape to size and then stick them on the frame and plexiglass. The ‘hook’ tape side provides a lot of holding power, so we recommend gluing a handle on the plexiglass, so that you can easily remove the window seal later. It is important to note that the adhesive layer may be difficult to remove from the window frame later.
Take care when cleaning acrylic. Do not use glass cleaner or similar products to clean the window seal of your air conditioner. This is because using aggressive cleaning agents can dull the plexiglass. Always use an anti-static cloth and cleaner. Read up on the best way to clean your window seal in our plastic cleaning blog.
We always do our utmost to deliver your package as quickly and neatly as possible. For this reason, we ensure that we package all your orders very carefully and that our shipping rates are fair and transparent. In addition, you will always receive a confirmation and a Track & Trace code from us when your package has been dispatched so that you can track your order right up to the door.
