Blind spacers - Oval black - Set of 10

With this set of oval spacers, you can mount milled letters and logos invisibly to the wall. The two-part click system lets your letters float off the wall, without a single screw ever coming into view.

• Complete: 10 male parts, 10 female parts, 10 stainless steel screws, 10 wall plugs and a torx bit
• Oval shape: often used for walls and surfaces that are tricky to mount to, such as exposed aggregate concrete panels and the like. If the hole is drilled slightly out of position, you can correct it with these
• Suitable for indoor and outdoor use
• Black, stays invisible behind your lettering
• All you need is a cordless drill

You glue the male part to the back of your letter and screw the female part into the wall. Click it in and you're done. Use the set for your business name on the shopfront, a logo behind the reception desk or an advertising sign on an exterior wall.

The male parts are made of acrylic and the female parts of PVC. The oval shape spreads the load over a larger area than a round spacer, which makes a difference on uneven surfaces, and stops the spacer from turning during mounting.

These spacers are ready to use, so there's no need to process them.

What does matter: tighten the screw in the female part hand-tight and then back it off a quarter turn. You need that little bit of play to click the male part smoothly into the female part and to absorb small alignment differences between your mounting points. If you tighten everything solid against the wall, you won't get the letter on without tension.

Anywhere you want to mount letters, logos or signs without visible fixings. The oval shape makes them especially suitable for older façades, rendered walls and rough brickwork, where a round spacer comes loose more easily.

Main areas of use

• Façade lettering — business names, shop name signs, large-format house numbers and advertising signs with a floating 3D effect
• Interior — logos behind reception, wall signs in showrooms, name plates on office doors and wayfinding signage
• Retail and events — exhibition stands, promotional signs and brand displays, quick to mount and click off again
• Public buildings — department signs, wayfinding in hospitals and schools, project boards on building sites

Remove dust and dirt with an antistatic polishing cloth and, if needed, a little lukewarm water with a mild cleaning agent. Never use a pressure washer on mounted letters: it can force the glued joint or the click apart.

For outdoor installations, we recommend a quick check once a year. Is every letter still firmly attached, are there any cracks at the glue points, is dirt or moisture building up behind the letters? You can simply click a letter off, inspect it and put it back. You'll find more cleaning products among our accessories.

For an installation that lasts for years, work in three steps: clean, glue and finish.

Clean — Fixxerss IPA Bonding Cleaner removes grease, dust and other dirt from your surfaces and dries residue-free. Use it on both the back of your letters and the male parts. This isn't an optional step; it's the difference between a glued bond that holds and one that comes loose after a winter.

Glue — For acrylic and polycarbonate, reach for the Fixxerss Super Glue Professional.

Finish — the antistatic polishing cloth keeps your letters dust-free without scratches. The antistatic action prevents dust from clinging, which is particularly an issue with plastic letters that build up static. It's also perfect for applying the IPA Bonding Cleaner.