How to Make an Infinity Mirror Yourself

Ever wondered how to make an infinity mirror? You can do it too! This captivating optical display combines depth and reflection for a stunning effect. In this step-by-step guide, we'll share with you how to create your own infinity mirror using acrylic and an acrylic mirror sheet. Taking you through every step; from gathering the necessary materials - to the final assembly.

Getting started is simple! Begin by gathering the right materials. Acrylic is clear and solid, exactly what you need. Use an acrylic mirror for a perfect reflection. Don’t forget the LED lights, as they bring the whole piece to life. With a bit of patience and the right tools in your hand, you’ll see how your infinity project comes together. Ready to dive in? Immerse yourself in the world of DIY and discover just how easy it can be!

An infinity mirror may look complex, but the principle is simple and brilliant. You create the illusion of infinite depth by placing a mirror sheet and a sheet with semi-translucent mirror film opposite each other. The LED strips are hidden in the space between. The light from the LEDs reflects endlessly back and forth between the sheets, with only a portion passing through the semi-translucent layer to the front, resulting in that distinctive infinity effect.

Start by cleaning your frame. Use an anti-static cleaner and a lint-free cloth to ensure the frame is free of dust and grease, which helps the LED strips to adhere properly. It's important that the frame is at least 5 centimetres deep so there is enough space for the LEDs.

Take the LED lights and attach them along the inner edge of the frame. Use Rody-Rapid super glue for a strong bond. Allow the LED strips to run evenly around the edge. If you desire a more powerful effect, consider placing multiple layers of LED strips on top of each other. Ensure everything is securely attached and neatly distributed.

Carefully measure your clear acrylic. Accurate measurement is crucial, so place the acrylic on the mirror film to trace the size if necessary. Then use sharp scissors or a knife to cut the mirror film precisely, so it fits perfectly on the acrylic.

Remove the protective film from both sides of the acrylic. Use an anti-static cleaner and a lint-free cloth to thoroughly clean the glass. This step is important to ensure the mirror film adheres perfectly without any issues.

Take the semi-translucent mirror film and gently apply it to the inside of your clear acrylic sheet. Start from one side and work slowly to the other, smoothing out any air bubbles with a credit card. Ensure the film is applied tautly and evenly for a flawless finish.

Start by putting the clear acrylic sheet, with the neatly applied mirror film, at the front of your setup. Then grab the frame where you’ve already mounted the LED lighting and place it on top of the clear acrylic sheet. Make sure the LED strips fit nicely and that no lights stick out over the edge. Next, add the mirror sheet, followed by the back panel. Now bend the clips back into place—and that’s it.

Congratulations! By following these steps, you’ve crafted an impressive decorative piece: your very own infinity mirror. By experimenting with different colours of LEDs, you can further personalise the effect for your space.

Excited about your DIY project? Order your materials quickly with us at Plasticsheetsshop.